Pinout of J2
PIN
Signal
1
-
2
VCC
3
GND
4
RXD
5
TXD
6
USB-
7
USB+
8
-
9
BUZ
10
LED
11
nWake
12
nTrig
Not connected.
3.3V power supply.
Power-supply ground.
RXD signal led out via the EVK3030 connects to the PIN (RXD) of the scan
engine.
TXD signal led out via the EVK3030 connects to the PIN (TXD) of the scan
engine.
USB D- differential data signal.
USB D+ differential data signal.
Not connected.
Beeper output.
Good Read LED output.
Reset signal input. The PIN is conneted to the Key K2 (reset). Press the
Key K2 (reset), and EVK3030 will enter the low level state. Keep the low
level above 100 us to reset the scan engine.
Trigger signal input.
Function
8