Installation - Zodiac Pool Systems Polaris 9300 Series Manual

Installation:

1- Assemble the caddy.
2- Attach the Power Pack to the caddy.
3- Connect 8' Cord to a GFCI Outlet.
-Keep the Power Pack 5' from the edge of the pool.
-Do Not Use an Extension Cord.
4- Connect the Floating Cable to the Power Pack snugly.
Installation:
5- Submerge the cleaner by the side of the pool.
-Turn the cleaner head over under the water to insure all air has been
removed.
-Allow the cleaner to sink to the bottom of the pool.
-Do Not Throw the cleaner into the pool.
6- Spread the floating cord around the pool evenly to
prevent coiling or kinking.
7
INSTALLATION