- To reduce the risk of electrical shock, do not use S3 Robotic cleaner or power supply RECOMMENDATIONS if the cord is worn or damaged. Contact Zodiac Pool Systems, Inc. immediately for a replacement cord. - NEVER OPEN POWER SUPPLY UNIT.
9. In no event shall Zodiac Pool Systems, Inc. be liable in contract or in tort, or under any other legal theory, for lost profits or revenues, loss of use or similar economic loss, or for indirect, special, incidental, consequential or similar damages, even if it has been advised of the possibility...
ASSEMblY ANd INITIAl USAGE ASSEMblY ANd INITIAl USAGE INITIAL USAGE Failure to heed the following warnings can result wARNING in permanent injury, electrocution or drowning. Select either Perfect or Turbo cleaning cycle on the power supply: PREVENT ELECTRICAL SHOCk The Perfect Cycle • Completed in 3 hours • Keep the power supply at least five (5) feet from the edge of the pool (3m (10ft.) • Cleans walls and floors...
Filter Element • Replace the filter element and ensure the elastic fits snugly around the filter frame. Diagram 12. The Zodiac Pool Systems, WEIGHT ADJUSTMENTS Inc. label should be located in the corner, alongside a rod. • Position the plastic retainer clips at the top of the rods. Weight adjustments can improve the cleaning efficiency of your • Replace the filter frame plate and snap it into place.
SOLUTION: • Ensure the surface of the brushes have not become smooth. We recommend that the brushes are changed every two (2) years, or sooner if they are worn. • Ensure the filter element is not full or clogged. If it is, simply clean it. • Ensure the floating cable is not excessively coiled or twisted. For further troubleshooting information, please contact Zodiac Pool Systems, Inc. at 800-822-7933.
Need help?
Do you have a question about the Baracuda S3 and is the answer not in the manual?
Questions and answers