Package Contents; Assembly - MegaTech CC Flyer Flight Manual

4
Before getting started you will need:
8 'AA' Alkaline batteries (sold separately)
First make sure the
contents of your
package are complete:
A. Fuselage
B. Main Wing
C. Transmitter
D. Transmitter Antenna
E. Battery Flight Pack
F. Charging Cord
G. Wind Detection
Ribbon
H. Wing Bands
I. Propeller & Spare
J. Landing Gear
K. Center Wing Support
1) Place the Main Wing onto the fuselage with wingtips angled upwards.
2) Line up the arrows on the center of the wing so they are pointing to the seam on the
fuselage (Fig. 1). Snap down into place.
3) Place the Center Wing Support directly over the center of the wing. Make sure the
rounded edge is towards the front of the plane and gently snap down into place. (Fig. 2)
4) Connect the Wing Bands to the posts on the fuselage and wrap them across the wing fi rst
in an "X "pattern and then a "II "pattern (Fig. 3).
Fig. 1

PACKAGE CONTENTS

D.
C.

ASSEMBLY

ATTACHING THE WINGS
Fig. 2
Decal
Towards
Front
G.
H.
E.
F.
Rounded
Edge
A.
K.
J.
I.
B.
Fig. 3