gB.Cooler.inSt.060501
17
other Particulars
Serial number
Every cooling unit has a specific serial number which to-
gether with its type designation forms a unique identifica-
tion number for each unit. The serial number is stamped
on the identification plate affixed on the inspection cover
of the unit.
Standards
The electrical equipment meets the provisions of Electrical
Safety Standard ELSÄK-FS 1999:5 and is CE-labelled in ac-
cordance with PED and the Low Voltage Directive 73/3/
EEC with Harmonization Standard EN
6004-1.
interference level
The Cooler is designed for installation in electical
environments where the Low Voltage Directive specifies
interference levels in accordance with the standards for
electromagnetic radiation in dwellings, offices, shops and
similar environment as well as in industrial environments.
18
environmental Documentation
18.1 Scrapping
The design of the unit makes it easy to dismantle and
sort according to the various types of material used in its
manufacture. When the unit has outlived its useful service
life, an accredited re-cycling firm should be engaged.
95% of the GOLD Cooler is re-cyclable.
Swegon AB is affiliated with REPA,
Reg. no. 5560778465.
Get in touch with Swegon AB, phone: +46 (0)51-300 if
you have any questions on dismantling and scrapping the
GOLD Cooler or the unit's environmental impact.
3
www.swegon.se
Specifications are subject to alteration without notice.