Step 4.
Remove the DC-in cable.
Figure 22. Remove the DC-in cable
Table 9. Screw specifications — removing the LCD module
Screw
Specifications
label
3
M2 ×3 mm, flat-head, nylon-coated
Refer to Table 3 "Part numbers for FRUs (CRUs)" on page 25 to look up the Lenovo part numbers of the
following replacement parts:
System board
thermal module
Base cover
Disassemble the LCD module
The LCD module as a whole is not a FRU. It contains FRUs as its components. Before disassembling the
LCD module, make sure it has been detached from the base cover. Refer to "Remove the LCD module" on
page 34 for instructions.
Remove the LCD bezel
Step 1.
Pry the six rubber pads
1
from the LCD bezel.
Color
Torque
Black
1.85 +/- 0.15kgf-cm
.
Chapter 4
Removing a FRU or CRU
37