Starting Your Dishwasher; Selecting A Cycle - Whirlpool DU7400XS Series Use & Care Manual

Whirlpool undercounter dishwasher use & care guide du7400xs
Hide thumbs Also See for DU7400XS Series:
Table of Contents

Advertisement

Before starting your dishwasher
1. Read "Important
Safety Instructions"
on page
2 before starting
your dishwasher.
2. Spin the Upper
and
Lower
Spray
Arms to
makesure
nothing will stopthem
from turning
freely.
3. Push door firmly when closing
and it will auto-
matically
latch.
4. Run hot water atsink nearest dishwasher
until
it is hot. Turn it off.
Starting your dishwasher
POTS & PANS Cycle...
1. Push POTS & PANS Cycle
Selector
Button.
2. Push button for option
desired.
3. Turn Cycle
Control
Knob clockwise
to line
marked
POTS & PANS. (POTS & PANS and NOR-
MAL WASH Cycles share the same spot on the
dial. The Selector
Buttons determine
which
cycle
operates.)
The dishwasher
will automatically
start that
cycle.
LIGHT WASH Cycle...
1. Push LIGHT WASH Cycle
Selector
Button.
- LIGHT WASH and
NORMAL WASH Cycles
share the same Cycle
Selector
Button. The
Control
Knob setting
determines
which
cycle
operates.
2. Push button for option
desired.
3. Turn Cycle
Control
Knob clockwise
to line
marked
LIGHT WASH. The dishwasher
will
automatically
start that cycle.
Selecting
a cycle
CYCLE SELECTOR BUllONS
NORMAL WASH Cycle...
1. Push NORMAL WASH Cycle
Selector
Button.
2. Push button for option
desired.
3. Turn Cycle
Control
Knob clockwise
to line
marked
NORMAL WASH. (NORMAL WASH and
POTS & PANS Cycles
share the same spot on
the dial.
The Selector
Buttons
determine
which cycle
operates.)
The dishwasher
will automatically
start that
cycle.
RINSE & HOLD Cycle...
1. Push NORMAL WASH Cycle
Selector
Button.
2. Select AIR DRY Option
only.
3. Turn Cycle
Control
Knob clockwise
to line
marked
RINSE & HOLD. The dishwasher
will
automatically
start that cycle.
POTS & PANS Cycle
Maximum
cleaning
for cooked-
or
baked-on
foods. Timer delays
while
the dishwasher
automatically
heats
the water
to 145°F (63'C)
in both
washes and the last rinse [marked
*).
Cycle
time
will
be about
1% to 2
hours, depending
on time needed
to heat water.
NORMAL
WASH Cycle
For normal,
everyday
soiled
loads.
(The Energy
Guide
Label
data
is
based
on this cycle.]
Cycle
time is
about
63 minutes.
.Iwl,m,m--
LIGHT WASH Cycle
For pre-rinsed
or lightly
soiled
loads.
Cycle
time
is about
58
minutes.
8

Advertisement

Table of Contents
loading

Table of Contents