Table of Contents
Advertisement
-m
B\
\
OPTION SELECTOR BUllONS
I-
OOR LATCH
CYCLE CONTROL
KNOB
RINSE & HOLD Cycle
For rinsing a few items to be washed
one or more days later. Cycle
time
is about
12 minutes.
Use AIR DRY only.
HEAT
DRY or AIR DRY?
If the HEAT DRY Option
is selected,
air in the
night)
and
some
water
spotting
may
result.
dishwasher
is heated
during
the "dry"
part of
Some items (such as plastics)
may need towel
the cycle.
drying.
If the AIR DRY Option
is selected,
air in the
dishwasher
is not heated.
Using this option helps
For best results, use a liquid
rinse aid such as
save energy, but dishes take longerto
dry (over-
Jet-D@
Changing a setting
You can
change
a setting
anytime
during
any cycle.
3. Be sure the detergent
dispensers
are filled
properly
for the new cycle.
1. Lift up on the door
latch to stop the cycle.
Don't open the door until the spray arms stop
4. Press door firmly to latch
it. The dishwasher
spinning.
will automatically
start the new cycle.
2. Turn the Cycle
Control Knob clockwise
to the
cycle
you want.
To add a dish after starting
1. To be sure the added
item is washed
and
4. Close the door. Do not latch
it. Wait 30 sec-
rinsed,
make
sure the Cycle
Control
Knob
onds for air in the dishwasher
to warm up. This
has not passed
LIGHT WASH.
helps
reduce
the amount
of moisture
that
2. Lift up on the door
latch to stop the cycle.
can come
from the vent when restarting
the
Don't open the door until the spray arms stop
cycle.
spinning.
5. Press door firmly to latch
it. The dishwasher
3. Open the door and add the dish.
will automatically
start where it stopped.
Advertisement
Table of Contents
