Download Print this page

Raytec XR8 Mounting & Installation

Surface/ceiling mounting

Advertisement

Quick Links

Surface/Ceiling Mounting Installation
Application
XR Bay luminaires are designed for use indoors, outdoors, wet locations, areas containing moisture, dirt, corrosion,
vibration and rough usage. The XR Bay luminaire has been certified for use on marine vessels inside, outside, and
in other severely wet saltwater environments.
Certified to:
UL 844, UL 1598, UL 1598A, and UL 8750;
CSA C22.2 No. 137, CSA C22.2 No. 250.0 and CSA C22.2 No. 250.13
Hazardous Location Certication:
Class I, Division 2, Groups ABCD;
Class II, Division 2, Groups FG;
Class III;
Class I, Zone 2, Group IIC;
Zone 22
Housing:
Copper-free Cast Aluminium with Polycarbonate lens
Input Voltage:
Based on luminaire suffix in table below: Suffix - AC: 120-277 VAC | Suffix - HV: 347-480 VAC
Electrical Ratings:
Connections:
3 x 3/4" NPT Conduit | Black: Line | White: Neutral | Green: Ground
Optional: Violet: 0-10V Dimming (+) | Grey: 0-10V Dimming (-)
For connections use wire rated to a minimum of 90°C. Class 1 Wiring only.
Dimming control wires must be rated 300V minimum for luminaires with suffix AC,
600V minimum for luminaires with suffix HV.
Ambient
Class I Division 2 | Class I Zone 2
Temperature
XR8: -50°C to +75°C T3C
Range:
XR10: -50°C to +74°C T3C
XR15: -50°C to +74°C T3C
XR20: -50°C to +67°C T3
Ingress Protection:
IP66/67 | Suitable For Wet Locations. Marine Outside Type (Salt Water)
Raytec Americas:
+1 613 270 9990 • ushazsales@raytecled.com
Raytec Ltd reserve the right to change specifications without prior notification or public announcement.
Input Voltage
Rated Wattage [Watts]
Model
AC
XR8
HV
AC
XR10
HV
AC
Flood: 84 Optic: 103
XR15
HV
Flood: 91 Optic: 107
AC
Flood: 141 Optic: 156
XR20
HV
Flood: 148 Optic: 160
Rated Voltage
[Volts]
Flood: 47 Optic: 60
120-277
Flood: 49 Optic: 64
347-480
Flood: 55 Optic: 75
120-277
Flood: 58 Optic: 77
347-480
120-277
347-480
120-277
347-480
Class II Division 2 | Zone 22
All models -50°C to +50°C T3C
SPZ-XR
E477827
Freqeuncy
[Hz]
50/60
50/60
50/60
50/60
50/60
50/60
50/60
50/60
Version 1
www.raytecled.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the XR8 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Raytec XR8

  • Page 1 XR20: -50°C to +67°C T3 Ingress Protection: IP66/67 | Suitable For Wet Locations. Marine Outside Type (Salt Water) Raytec Americas: +1 613 270 9990 • ushazsales@raytecled.com Version 1 www.raytecled.com Raytec Ltd reserve the right to change specifications without prior notification or public announcement.
  • Page 2 (Not provided) must be rated for a minimum of 180 lbs. Step 3B 0.5in 0.5in 12.7mm 12.7mm     0.5in 0.5in 12.7mm 12.7mm Raytec Americas: +1 613 270 9990 • ushazsales@raytecled.com Version 1 www.raytecled.com Raytec Ltd reserve the right to change specifications without prior notification or public announcement.
  • Page 3 XR Head and the XR cover. Tighten cover bolts to 1.7 N-m (15 in-lbs). Raytec Americas: +1 613 270 9990 • ushazsales@raytecled.com Version 1 www.raytecled.com Raytec Ltd reserve the right to change specifications without prior notification or public announcement.
  • Page 4 *Any additional wiring not shown has been capped by the factory and is not to be used. Raytec Americas: +1 613 270 9990 • ushazsales@raytecled.com Version 1 www.raytecled.com Raytec Ltd reserve the right to change specifications without prior notification or public announcement.
  • Page 5: Pole Mount Installation

    Resume installation instructions provided with luminaire. (STEP 4 in XR Installation Instructions from the Surface/Ceiling Mount installation provided with Luminaire). Raytec Americas: +1 613 270 9990 • ushazsales@raytecled.com Version 1 www.raytecled.com Raytec Ltd reserve the right to change specifications without prior notification or public announcement.
  • Page 6: Wall Mount Installation

    Resume installation instructions provided with luminaire. (STEP 4 in XR Installation Instructions from the Surface/Ceiling Mount installation provided with Luminaire). Raytec Americas: +1 613 270 9990 • ushazsales@raytecled.com Version 1 www.raytecled.com Raytec Ltd reserve the right to change specifications without prior notification or public announcement.
  • Page 7 Resume installation instructions provided with luminaire. (STEP 4 in XR Installation Instructions from the Surface/Ceiling Mount installation provided with Luminaire). Raytec Americas: +1 613 270 9990 • ushazsales@raytecled.com Version 1 www.raytecled.com Raytec Ltd reserve the right to change specifications without prior notification or public announcement.
  • Page 8 Resume installation instructions provided with luminaire. (STEP 4 in XR Installation 6.76mm 6.8mm 70mm Instructions from the Surface/Ceiling Mount installation provided with Luminaire). Raytec Americas: +1 613 270 9990 • ushazsales@raytecled.com Version 1 www.raytecled.com Raytec Ltd reserve the right to change specifications without prior notification or public announcement.
  • Page 9 Resume installation instructions provided with luminaire. (STEP 4 in XR Installation Instructions from the Surface/Ceiling Mount installation provided with Luminaire). Raytec Americas: +1 613 270 9990 • ushazsales@raytecled.com Version 1 www.raytecled.com Raytec Ltd reserve the right to change specifications without prior notification or public announcement.
  • Page 10 Resume installation instructions provided with luminaire. (STEP 4 in XR Installation Instructions from the Surface/Ceiling Mount installation provided with Luminaire). Raytec Americas: +1 613 270 9990 • ushazsales@raytecled.com Version 1 www.raytecled.com Raytec Ltd reserve the right to change specifications without prior notification or public announcement.
  • Page 11 XR Wiring Cover. Tighten lens bolts using a 7mm socket or box wrench to 1.7 N-m (15 in-lbs). Raytec Americas: +1 613 270 9990 • ushazsales@raytecled.com Version 1 www.raytecled.com Raytec Ltd reserve the right to change specifications without prior notification or public announcement.
  • Page 12 Connect Green wire from surge protector to splice or terminal connected to Grounding branch circuit conductor and green lead from luminaire case. Raytec Americas: +1 613 270 9990 • ushazsales@raytecled.com Version 1 www.raytecled.com Raytec Ltd reserve the right to change specifications without prior notification or public announcement.
  • Page 13 XR Wiring Cover. Tighten lens bolts using a 7mm socket or box wrench to 1.7 N-m (15 in-lbs). Raytec Americas: +1 613 270 9990 • ushazsales@raytecled.com Version 1 www.raytecled.com Raytec Ltd reserve the right to change specifications without prior notification or public announcement.
  • Page 14 Connect Green wire from surge protector to splice or terminal connected to Grounding branch circuit conductor and green lead from luminaire case. Raytec Americas: +1 613 270 9990 • ushazsales@raytecled.com Version 1 www.raytecled.com Raytec Ltd reserve the right to change specifications without prior notification or public announcement.

This manual is also suitable for:

Xr10Xr15Xr20