Live And Emulate Panel - Extron electronics NetPA Ultra Series User Manual

Presets Drop-Down
The
Presets
configuration file or on a device connected in Live mode. Presets with an asterisk next to
them are on the amplifier, but not in the current configuration file. Run a preset to load it into
the configuration file. Alternatively, perform a backup to run all presets and load them into
the current configuration file (see
Figure 27.
After selecting a preset from the list, choose one of the following actions from the
DSP Configurator status panel:
•
Recall
•
Cancel
emulation or state intact.
•
Delete
Figure 28.
DSP Configurator Status Panel
This panel displays the current status of DSP Configurator and shows when data is being
pushed to or pulled from the device. When the software is ready to perform actions, the
panel reads
Figure 29.

Live and Emulate Panel

The and
Live
displays transmit activity (Tx) and receive activity (Rx) when in Live mode.
Figure 30.
Emulate Mode
While in Emulate mode, DSP Configurator is functioning in an "offline" state. Changes made
to the configuration file are not applied to a device.
In Emulate mode, the user can create and configure the software as though a device was
connected, except for any actions that require direct connection to the device or information
that is stored only on the device. Once configuration is complete, the user can switch to
Live mode and apply the configuration to the device or save the configuration file to be
loaded onto one or multiple devices at a later time.
drop-down list allows the user to view and apply presets saved in the current
File on page 25).
Presets Drop-Down Menu
— Recalls the selected preset and applies settings to the main workspace.
— Cancels the preset recall and returns to the main workspace with the current
— Deletes the selected preset from the configuration.
Preset and Action Selection
.
Ready
DSP Configurator Status Panel
buttons allow users to switch between Live and Emulate mode and
Emulate
Mode Panel
NetPA Ultra Series • DSP Configurator Software 28