Product Regulations
IEC 1010-1:1990+A1 / EN 61010-1:1993
Safety
UL 3111
CSA-C22.2 No.1010.1:1993
This Product meets the requirement of the European Communities (EC)
EMC
EMC Directive 89/336/EEC.
Emissions
Immunity
N/A
Sound Pressure
Level
Installation category (overvoltage category)
Definitions
equipment, telecommunication, electronic etc., with smaller transient overvoltages than
installation (overvoltage category)
Installation category (overvoltage category)
equipment etc., with smaller transient overvoltages than installation category
Indoor use only.
Enviromental
Altitude up to 3000 m. (10,000 ft.)
Conditions
Temperature
Instrument - 0 degrees C to 50 degrees C (32 degrees F to 122 degrees F)
Probes/cables - 0 degrees C to 65 degrees C (32 degrees F to 149 degrees F)
Humidity
Relative humidity 8 to 80% at 40 degrees C (104 degrees F)
Power
CAT
II
, Pollution degree 2
HP E2485A: ~Line 100-240 volts ± 20%, 50-60 Hz, 40 Watts max.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
EN55011/CISPR 11 (ISM, Group 1, Class A equipment)
IEC 555-2 and IEC 555-3
EN50082-1
IEC 801-2 (ESD) 8kV AD
IEC 801-3 (Rad.) 3 V/m
IEC 801-4 (EFT) 1kV
Performance Codes:
1 PASS - Normal operation, no effect.
2 PASS - Temporary degradation, self recoverable.
3 PASS - Temporary degradation, operator intervention required.
4 FAIL - Not recoverable, component damage.
I:
II.
II:
Code
Notes
3
3
3
Signal level, special equipment or parts of
Local level, appliances, portable
III.