MacuLogix AdaptDx Pro M-1 User Manual page 6

• You can set the time by manually enter the time and date, by using the up and down arrows.
10
Select default eye and test
Click on the "System Tools" icon at the top of your screen. Scroll through setup options and choose the
"Edit Test Defaults" screen.
• Select the default test eye. The icon on the left side of the screen indicates the right eye and the
icon on the right side of the screen indicates the left eye.
• Set test type. The icon on the left side of the screen indicates the Rapid Test and the icon on the
right side of the screen indicates the Extended Test.
-
The Rapid Test is a pass/fail protocol used to assess the patient's dark adaptation function and
takes 2.5 to 6.5 minutes to complete. The Extended Test
of the patient's dark adaptation function and a benchmark for monitoring changes over time. The
Extended Test can take up to 20 minutes to complete, based on the severity of impairment.
For example, in this case:
- The default settings would be Left Eye, Rapid Test. You can change your default settings at any time
by selecting the "System Tools" on the home screen and repeating the process described above.
You can edit any of your default settings at any time. Simply select the "System Tools" icon at the top of
your screen and choose the item to be edited.
provides a detailed characterization
11