If a display flashes
This means that:
you have not placed a pan on the correct
●
cooking zone or
the pan you're using is not suitable for induction
●
cooking or
the pan is too small or not properly centred on the
●
cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone. The cooktop will
automatically turn off after 10 minutes if no suitable pan is placed on it.
After cooking is done
1
2
3
USING YOUR INDUCTION COOKTOP
alternately with the heat setting
Turn the cooking zone off by touching the
On/Off control.
COOKING ZONE
Turn the whole cooktop off by touching
the
On/Off control.
COOKTOP
Beware of hot surfaces:
window of any cooking zone that is too hot
to touch. It will remain on and steadily lit
even when the cooktop is turned off. It will
disappear when the surface has cooled down
to a safe temperature.
H
will flash in the
13