Using Your Induction Cooktop - Fisher & Paykel CI365DTB1 Installation Instructions And User Manual

Using your induction cooktop

20
US
CA
To start cooking
Place a suitable pan on the
1
cooking zone you wish to use.
Make sure the bottom of the pan
and the surface of the cooking
zone are clean and dry.
Select a heat setting by touching
3
If you touch
If you touch
The number of indicators in the 'crescent' corresponds to the heat setting
(eg two indicators = heat setting 2).
You can modify the heat setting at any time during cooking.
If you don't choose a heat setting within 10 seconds, the cooking zone will automatically turn
off. Start from step 2 again.
Tip: to clear a cooking zone's heat setting quickly, touch its
do not select a new heat setting within 10 seconds, the cooking zone will automatically turn off.
If the 'No pan' indicator
This means that:
you have not placed a pan on the correct cooking zone or
the pan you're using is not suitable for induction cooking or
the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The cooking zone will automatically turn off after 30 seconds if no suitable pan is placed on it.
or
, you will start out at the lowest heat setting (1).
, you will start out at the highest heat setting (8).
glows
Touch the ON/OFF control of the
2
cooking zone.
The ON/OFF indicator will glow.
OR
.
and
ON/OFF indicator
controls together. If you
'No pan' indicator