Understanding The Status; Indicators - Whirlpool 980 Series Use And Care Manual

Understanding the status indicators
LOCK OUT
The LOCK OUT feature lets YOU bck out the
E!¶
function of the control
. .
pads. When using
LOCK OUT, you cannot
start the dishwasher.
To use LOCK OUT:
l
Press and hold AIR DRY (about 5 seconds)
until the LOCK OUT indicator glows.
To turn off LOCK OUT:
l
Press and hold AIR DRY (about 5 seconds)
until the LOCK OUT indicator turns off.
WASHING
The WASHING indicator glows at the start of
the first fill of any cycle
(except RINSE/WASH
LATER)
and
remains on
until the end of the main
wash.
WATER HEATING
The WATER HEATING indicator glows
RINSING
The RINSING indicator glows during the
DRYING
The DRYING indicator glows during the
dishes are not as dry as you expected when
using AIR DRY, either allow longer drying
times (overnight) or do not use AIR DRY.
ADD-A-DISH
The ADD-A-DISH indicator glows as -n
1
as the dishwasher starts
and keeps glowing until
the main wash portion of
the cycle begins. You
can add an additional item while the indica-
tor is on.
CLEAN
The CLEAN indicator glows at the end of a
1
cycle to show that the
load is clean. All other
indicators turn off. The
CLEAN indicator glows
until you press CANCEL/DRAIN
or
any other
control pad.
16