Understanding The Status Indicators - Whirlpool Series 980 Use And Care Manual

Understanding the status indicators
Lock Out
The Lock Out feature lets you lock out the
function of the control
pads. When uslng Lock
Out, you cannot start
the dlshwasher.
To use Lock Out:
l
Press and hold Air Dry (about 5 seconds)
To turn off Lock Out:
l
Press and hold Air Dry (about 5 seconds)
until the Lock Out indicator turns off.
Washing
The Washing indicator glows at the start
- of the first fill of any cycle
(except Rinse/Wash
Later) and remains
on until the end of the
main wash.
Water Heating
The Water Heating indicator glows when-
Rinsing
The Rinsing indicator glows during the
Drying
The Drying indicator glows during the
drying portion of each
cycle - even if you select
Air Dry. It turns off at
the end of the cycle. If
dishes are not as dry as you expected when
using Air Dry, either allow longer drying
times (overnight) or do not use Air Dry.
Add-A-Dish
The Add-A-Dish indicator glows as soon
as the dishwasher starts
and keeps glowing until
the main wash portion of
the cvcle beains. You
can add an additional ite-m while the indica-
tor is on.
Clean
The Clean indicator glows at the end of a
cycle to show that the
load is clean. All other
indicators turn off. The
Clean indicator glows
until you press Cancel/Drain or any other
control pad.