Playback Of A Video Cd Without P. B. C. (Version 1.1) - Sharp XL-3000V Operation Manual

Playback of a Video CD without P. B. C. (Version 1.1)

1
Turn on the TV and set the input selector to "VCR".
2
Press the ON/STAND-BY button to turn the power on.
3
Press the FUNCTION button until "CD" or "NO DISC"
appears on the display.
When operating with the remote control, press the CD button.
4
Press the (OPEN/CLOSE) button to open the disc
compartment.
5
Place a video CD on the spindle, label side up.
Be sure to place 8 cm (3") disc in the middle of a disc holder.
6
Press the (OPEN/
CLOSE) button to
close the disc com-
Total number of
partment.
tracks
7
Press the ( ) button to start playback from track 1.
When the last track on the disc has finished playing, the unit will
stop automatically.
To interrupt playback:
Main unit operation:
Press the button.
To resume playback from the same point, press the
Remote control operation:
Press the button.
To resume playback from the same point, press the
To stop playback:
Press the button.
To remove the video CD:
Whilst in the stop mode, press the
Press the disc eject button and remove the video CD.
After use:
Press the ON/STAND-BY button to enter the stand-by mode.
Sound Control (See page 15.)
Total playing time
button again.
button.
(OPEN/CLOSE) button.
ENGLISH
XL-3000V
E-22