Sanyo Carrier 16LJ Series Installation Instructions Manual page 47

4.8 - exhibit LI (cont.)
4.8.3 - Specification setting
Push the "set" key for
about 2 seconds.
Chilled water setting
Hot water setting
Chilled water temperature difference setting
Hot water temperature difference setting
rank up/down
Purge pump lamp on
Purge pump lamp off
Fig. 28 (cont.)
Fig. 28
Value given as example
Note
No change
Value given as example
Note
No change
No change
Note
Note
Note
Legend
p
Push " " key.
q
Push " "key.
Push the "SEt" key for about 2 seconds.
Push the "bACK" key.
Note
1. If there is no change, push the "back" key.
2. If there is a change, push the "
and the push "SEt" key.
Fig. 28 (cont.)
Not applicable
Crystallization
Chilled water setting
p" or " q"
key,
No change
No change
No change