Table of Contents
Advertisement
4.4 - exhibit Le (cont.)
4.4.9 - Dimensional drawings
16LJ-11 through 16LJ-12 (mm)
Notes:
1.
Dimensions (L), (W), (H) are for a standard machine. the dimensions are
changed by parts added.
2.
indicates the position of anchor bolts.
3.
Clearance space must be available at the front and rear of the chiller.
4.
All external water piping are to be provided with welded ANSI 150 Lb
flanges by the customer.
5.
indicates the position of the power supply connection on the control
panel (diameter 35 mm).
6.
Installation clearance:
Ends
1000 mm
top
200 mm
others
500 mm
Space for tube removall
Hot water outlet (4 inch)
Cooling water outlet (5 inch)
Hot water inlet (4 inch)
Chilled water outlet (3 inch)
Chilled water inlet (3 inch)
Cooling water inlet (5 inch)
16LJ-13 through 16LJ-14 (mm)
Hot water outlet (4 inch)
Cooling water outlet (5 inch)
Hot water inlet (4 inch)
Chilled water outlet (4 inch)
Chilled water inlet (4 inch)
Cooling water inlet (5 inch)
NOTE: Dimensions are for guidance only. Refer to the certified drawings supplied upon request when designing an installation.
Hot-water outlet
rupture disk
(2 inch)
Hot-water outlet
Wire connection
Ø 35 hole
rupture disk
(2 inch)
Model
A
16LJ-11
101 mm
Chilled water outlet
16LJ-12
124 mm
Wire connection
Ø 35 hole
P
R
U
G
E
Cooling water in/out
Chilled water outlet
Hot water inlet
Hot water outlet
tube removal
Cooling water
in/out
tube removal
P
U
R
G
E
P
U
M
P
Hot water outlet
Hot water inlet
Chilled water inlet
Chilled water inlet
Advertisement
Table of Contents
