Advertisement
Step 1 Align the legs to the pre-drilled holes at the bottom of the units, insert bolts and washers
then tighten with Allen Key. Rotate support leg Q to tighten it.
Step 2 Align and insert the back rest to the positon shown in drawing, push to the end to secure it.
Step 3 Aligh the entire back cushions to the back rest, attach to the Velcro, adjust and fix it properly.
I
Care instruction for PU furniture.
In order to maintain the original appearance of your PU furniture,
please follow below simple care procedures:
Avoid exposing furniture directly to sunlight or heating and air conditioning outlets.
Sunlight and/orexposure to heating and air conditioning outlets will fade/damage PU.
Do not place your PU surface furniture too close to windows,radiators,or vents,and be sure
to use windows,radiators,or vents.
Vacuum or wipe with a cloth regularly to remove dust.
Clean PU surface furniture with professional cleanser.
For items use on wooden floor,hard surfaces or carpets,it is recommended to install
protective pads under all legs and supports to avoid/prevent from damages/scratches and
discoloration.
OL
N
N
OR
N
Advertisement
