15. Wi-Fi/Bluetooth
Connecting by Manual Input
Check the SSID, network authentication, encryption, and encryption key of the
0
wireless access point you are using.
1
In the screen in Step
2
Enter the SSID of the wireless access point you are connecting to, and
then select [Set].
How to enter characters (l 415)
0
3
Select the network authentication.
[WPA2-PSK]
[WPA2/WPA-PSK]
[No Encryption]
4
(When other than [No Encryption] is selected)
Enter the encryption key and then select [Set].
462
1
of "[From List]", select [Manual Input]. (l 461)
Supported encryption: [TKIP], [AES]
—