Table of Contents
Advertisement
In [M] mode, you can compensate the exposure by setting the ISO sensitivity
0
to [AUTO].
When the exposure compensation value falls below or exceeds n3 EV, the
0
brightness of the recording screen will no longer change.
Press the shutter button halfway or use AE Lock to reflect the value on the
recording screen.
The set exposure compensation value is stored even if you turn off the
0
camera.
The standard value for standard exposure can be adjusted:
0
[
]
[
]
You can set the exposure compensation value to be reset when the camera is
0
turned off:
[
]
[
]
You can change the operation of the [
0
[
]
[
]
Exposure Bracket can be set and flash output can be adjusted on the
0
exposure compensation screen:
[
]
[
]
[Exposure Offset Adjust.] (l 371)
[Exposure Comp. Reset] (l 372)
[WB/ISO/Expo. Button] (l 379)
[Exposure Comp. Disp. Setting] (l 379)
7. Metering/Exposure/ISO Sensitivity
] button:
197
Advertisement
Table of Contents
