Table of Contents
Advertisement
2. Getting Started
Charging Light Indications
You can also charge the battery by connecting a USB device (PC, etc.) and
0
the camera with the USB connection cable.
Charging may take longer in this case.
The battery in the Battery Grip (DMW-BGS5: optional) cannot be charged.
0
Do not use any other USB connection cables except the supplied one.
0
This may cause malfunction.
Do not use any other AC adaptors except the supplied one.
0
This may cause malfunction.
After charging, disconnect the connection to the power source.
0
While the charging light is blinking red, charging is not possible.
0
– The temperature of the battery or surroundings is either too high or too low.
Try charging at an ambient temperature between 10 °C and 30 °C (50 oF
and 86 oF).
– The terminals of the battery are dirty.
Remove the battery and wipe off the dirt with a dry cloth.
Even when the camera on/off switch is set to [OFF] thus turning the camera
0
off, it consumes power.
When the camera will not be used for a long time, remove the power plug from
the electrical outlet in order to save power.
40
Charging light (red)
On:
Charging.
Off:
Charging has completed.
Blinking:
Charging error.
Advertisement
Table of Contents
