LD Series | Installation and user manual |
2.4 Advices and safety
The majority of problems with the induction loops
happens when the installation has not been properly
reflected so let's take a little time before starting the
installation and gain in result and time.
Ideally, the loop amplifier should be placed near the
area to be covered. This may involve placing the
amplifier on a panel, under a desk, or under a
counter.
See figure 9 page 17
To position the loop in the space to be equipped, it is
important to take into account the future users of
the system.
For example, if you only need to have the speaker
and the client, a reduced coverage with a centered
loop may be a better solution than a loop around the
perimeter of the room. It will limit radiation and
increase confidentiality.
User Manual
6