Intercom Avant Monitor Video monitor with 5.6” flat screen and “hands-free” audio, based on digital technology, which can attend calls from external panels, switchboards and also intercommunication calls from other monitors (up to 15 different). Allows the wiring of a standard installation with 4 Wire + COAX or Twisted Pair.
Page 3
Intercom Avant Monitor installation BUILT-IN 1º- Fix the frame to the mounting box with the provided screws. The frame allows adjusting little deviations of the mounting box. 2º- Remove the terminal blocks of the monitor and proceed with the wiring. 3º- Configure the monitor and plug the terminal blocks again to the monitor.
Page 5
Intercom Avant Monitor Installation Villa installation VIDEO COAX COAXLESS SEE PREVIOUS SCHEME POWER SUPPLY Door opener 230 Vac Building installation COAX VIDEO VIDEO COAXLESS COAX COAXLESS (apartment code) SEE PREVIOUS SCHEME VIDEO COAX COAXLESS DO NOT WIRE + 230 Vac POWER SUPPLY GENERAL BUS NOTE:...
Intercom Avant Monitor Functioning Note: When the monitor is in stand by mode, pressing OK key will activate the monitor. INCOMING CALL PANEL CALL - When the monitor receives a call from the outdoor panel, it starts ringing, the available function keys get lit up and the screen turns on showing the picture of the person who has made the call.
Programming a 0, which is the default value, the output works as a toggle. One press activate, another one deactivates it. POL. IND. EL OLIVERAL - CALLE C , NAVES 9-10 46394 RIBARROJA DEL TURIA (VALENCIA) TFNO. +34 96 164 30 20 - FAX. +34 96 166 52 86 E-MAIL: AUTA@AUTA.ES HTTP://WWW.AUTA.ES...
Page 8
POL. IND. EL OLIVERAL - CALLE C , NAVES 9-10 46394 RIBARROJA DEL TURIA (VALENCIA) TFNO. +34 96 164 30 20 - FAX. +34 96 166 52 86 E-MAIL: AUTA@AUTA.ES HTTP://WWW.AUTA.ES...