Inficon I/O1000 Quick Start Installation Manual

Quick-start installation guide for I/O1000 I/O module
Safety instructions
This quick-start guide does not replace the
installation manual for the I/O1000 I/O module.
Safe use of the module is ensured only by reading
the installation manual.
Additional important information is provided in
the installation manual for the I/O1000 I/O module.
The manual can be found either on the USB
memory stick or on the INFICON website. The USB
memory stick is included with the shipment of the
I/O module.
Intended use
The I/O module is a device interface between the MSB
box of the mass spectrometer module LDS3000 and
an external controller, for example.
► Install, operate and service the unit only in
compliance with the installation manual.
► Comply with the limits of application.
User requirements
► Operate and install the unit only if it is in perfect
working order and as intended, in a safety-
conscious manner and fully aware of dangers, in
compliance with this manual.
► Fulfill and ensure compliance with the following
regulations:
– Intended use
Document: jima10en1-03 (1503)
– Generally applicable safety and accident
prevention regulations
– International, national and local standards and
guidelines
– Additional provisions and regulations that are
specific to the unit
► Use only original parts or parts approved by the
manufacturer.
► Keep the installation manual available at the
operating site.
► All work must be performed only by technical
specialists who have been trained on the unit.
► Allow personnel in training to work with the unit
only under the supervision of technical specialists.
► Make sure that the authorized personnel have read
and understood this manual and all other
applicable documents, especially the information
on safety, maintenance and repairs, before starting
work.
► Define responsibilities, authorizations and
supervision of personnel.
User requirements
► Read, observe and follow the information in the
installation manual and the working instructions
created by the owner, especially the safety
instructions and warnings.
► Perform all work based on the complete manual.