Supplied Accessories - Panasonic Lumix DMW-STC14 Operating Instructions Manual

lens mount rubber, contact points, or into the digital
camera, lens, or this unit.
– If liquid gets on the unit, wipe it off with a dry soft
cloth.
To improve the dust and splash resistant performance
0
of the unit, a lens mount rubber is used in the mount.
– The lens mount rubber will leave scuff marks on the
digital camera mount, but this does not impact
performance.
– For information on changing the lens mount rubber,
contact Panasonic.
∫ Condensation (when the lens is fogged up)
Condensation occurs when the ambient temperature or
0
humidity changes. Please be careful, as it may cause
lens stains, mold and malfunction.
If condensation occurs, turn off the digital camera and
0
leave it for approx. 2 hours. The fog will disappear
naturally when the temperature of the digital camera
becomes close to the ambient temperature.
The appearance and specifications of products
0
described in this document may differ from the actual
products you have purchased due to later
enhancements.

Supplied Accessories

Check that all the accessories are supplied before using
the product.
Product numbers correct as of May 2019. These may be
subject to change.
1 2
VFC4456 DVGX1297Z
1 Lens pouch
2 Lens cap
¢
3 Lens rear cap
¢
¢ Attached to the teleconverter at the time of purchase.
3
RGE1Z276Z
15
DVQX1832
(ENG)