Assembly Of The Internal Structure - C.P.A. PISCINA MEDITERRANEA Installation Manual

MEDITERRANEA
9. Assembly of the structure
interna
The internal structure of the swimming pool is made up of internal panels, corner pillars, ribs and finally
the buttresses, as listed below:
Internal Code
4030020
4030171
4030021
4030022
4030023
4030024
4030025
4030026
4030027
4030051
4030052
4030096
4030097
The main elements that make up the internal structure of the Mediterranean are the 20/10 mm thick
galvanized steel panels. These elements, 1500 mm long and 1225 mm high, can have holes in which to
accommodate the pool accessories, such as intake vents, skimmers, lights and possibly swimming
against the current model Bellow Jet (optional). The panels have holes on both the lateral and upper and
lower wings to allow the connection between the various elements.
The panels with the predisposition for accessories such as skimmer, lighthouse, intake vents will be
installed on the short sides of the pool. The panels with the predispositions for skimmer and lighthouse
from the side where the technical compartment will be made. Those without holes (cod.art.4030020)
will be installed in the end parts of the long sides, in contact with the corner posts (cod.art.4030027).
Finally, those with double reinforcement (code art. 4030171) will be positioned in the central parts of the
same sides.
INTERNAL STRUCTURE
Quantity
4
4
1
1
1
1
optional
16
4
2
2
2
2
www.cpa-piscine.it
11 / 24
Component
Inside panel 1500
Inside panel double reinforcement 1500
Skimmer Panel 1500
Right vent panel 1500
Left vent panel 1500
Panel light 1500
Bellow jet Panel 1500
Reinforcement Panel 1500
Pillar corner
Centring top corner
Centring lower corner
Centring upper technical compartement
Centring lower technical compartement
06/12/2019
Ver.00