Package Contents; Hardware Installation - Grandstream Networks GWN7615 Quick Installation Manual

OVERVIEW
EN
The GWN7615 is an enterprise performance 802.11ac Wave-2 Wi-Fi ac-
cess point to create scalability for medium to high user density environ-
ments. It offers dual-band 3x3:3 MU-MIMO technology and a sophisti-
cated antenna design for maximum network throughput and expanded
Wi-Fi coverage range. To ensure easy installation and management, the
GWN7615 uses a controller-less distributed network management de-
sign in which the controller is embedded within the product's web user
interface. The GWN7615 is also supported by GWN.Cloud and GWN
Manager, Grandstream's cloud and on-premise Wi-Fi management plat-
forms. It is the ideal Wi-Fi AP for voice-over-Wi-Fi deployments and offers
a seamless connection with Grandstream's Wi-Fi-capable IP phones.
With support for advanced QoS, low-latency real-time applications,
mesh networks , captive portals, 200+ concurrent clients per AP and
dual Gigabit network ports with PoE/PoE+, the GWN7615 can be used
to create a scalable solution as big or small as needed for the deploy-
ment scenario, from office buildings to retail locations, hotels and more.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of 0 °C to 40 °C for
operating and -10 °C to 60 °C for storage.
• Do not expose the GWN7615 to environments outside of the following humid-
ity range: 10-90% RH (non-condensing).
• Do not power cycle your GWN7615 during system boot up or firmware up-
grade. You may corrupt firmware images and cause the unit to malfunction.

PACKAGE CONTENTS

1x GWN7615
Access Point
3x Screw
(PM 3 x 50)
1x Mounting 1x Ceiling
Mounting Bracket
Bracket
3x Screw
3x Plastic
(PA 3.5 x 20) Expansion Bolt
~1~
3x M3 NUT
1 x Quick Installation Guide
GWN7615 PORTS
Port Description
NET/POE Ethernet RJ45 port (10/100/1000Mbps) supporting
PoE/PoE+.
NET Ethernet RJ45 port (10/100/1000Mbps) to your rout-
er or another GWN76xx.
RESET Factory reset button.
Press for 7 seconds to reset factory default settings.
POWERING AND CONNECTING THE GWN7615
GWN7615 can be powered on using PoE/PoE+ switch using following
steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of GWN7615.
Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE/PoE+) switch.
Network Port

HARDWARE INSTALLATION

GWN7615 can be mounted on the wall or ceiling, Please refer to the
following steps for the appropriate installation.
~2~
RJ45 Ethernet Cable
to power over Ethernet
(PoE/PoE+) Switch