Connecting The Fan Controller; Installing The Front I/O Connectors; Frequently Asked Questions - Corsair CARBIDE Series Installation Manual

CARBIDE SERIES

9. Connecting the Fan Controller

1. Connect the SATA power
connector to the PSU SATA
power cable.
2. Connect the 3 or 4-Pin fan
connecter to the case fan
header.
3. Push the fan speed selector
button on your case to
toggle fan speed.

10. Installing the Front I/O Connectors

See your motherboard's
manual for front panel header
locations and pin-outs.
USB 3.0
HD AUDIO
23
SPEC-ALPHA
®
1
2
3
HDD LED
POWER SW
RESET SW
POWER LED +

Frequently Asked Questions

1. How do I remove the I/O Panel ?
2. Does the polarity matter with the I/O panel's power and
3. Who should I contact if I received my case damaged or one of the
POWER LED –
4. Where can I mount a fan?
To learn more about this case visit the product page at corsair.com
If needed, you can uninstall your I/O panel by removing the front
fascia (step 5) then unscrewing the 2 screws at each side of
panel. (see drawing).
reset header?
No, only the LED headers.
fans is no longer working?
Please go to www.corsair.force.com and request an RMA
so that we can replace the damaged part(s).
Fan Mount Locations
Front 2 x 140mm or 120mm (2 x 120mm included)
Top
Rear 120mm (included)
Bottom
Side
Mid
2 x 120mm
120mm
x
x
24