Advertisement
2.
Touch AUTO SET.
(NOTE: Skip to Step 6 if
you want to use the preset
cooking
time and Cook
Power.)
3. Touch a Number
Pad for
the new cooking
time you
want from 1 to 9 minutes.
I.
El . .
4.
Touch COOK POWER.
(Option:
Skip to Step 6 if
you want to cook at high
power.)
5. Touch a Number
Pad for
the Cook Power you want.
6. Touch START.
The AUTO SET Indicator
Light
will come on and the Display
will show 2 minutes, 30 seconds
[or the
time you have set as your favorite
cycle).
The Display
will show what you
touched
in even minutes. This
example
shows you touched
4
minutes.
The COOK POWER Indicator
Light
will come on and the Display
will show "P-HI:'
The Display
will show what you
touched.
This example
shows you
touched
Number
Pad 5 for 50% of
full power.
The AUTO SET Indicator
Light will Stay
on while the oven is cooking
in the pre-
programmed
cycle.
If you selected
a
Cook Power other than high, the Cook
Power Indicator
Light will also come
on. This shows the oven is cooking
at a
selected
Cook Power.
The Display
counts down the time to
show how much cooking
time is left.
When Auto Set ends, "End" will
show on the Display
and 4 beeps
will sound. [You can stop the
beeping
by opening
the door or
by touching
CANCEL.) "End" will
remain on the Display
and a beep
will sound every 60 seconds
(to remind you that food is left in the
oven] until the door is opened
or
CANCEL is touched.
The Display
will
then show the time of day.
NOTE: You can set COOK or PROBE TEMP to follow
Auto Set, if desired.
Touch in instructions
for 'Microwave
Cooking
at High Cook Power"
(page
81, "Microwave
Cooking
at lower
Cook
Powers"
(page
9) or 'Cooking
with the Temperature
Probe"
(page
16).
Advertisement
