Sanyo DP19640 Service Manual page 6

SERVICE ADJUSTMENTS
r WB SETTING
Pattern
White Pattern 100�� (in AV mode).
Condition
Picture Mode: STANDARD
Color Temperature: NORMAL
Aging Time: More than 10 minutes
Adjustment
1. Enter the Service Mode.
2. Select "WB SETTING" by pressing ▲ or ▼ button, then press ENTER button to enter WB SETTING
menu. Usually it only need to set the value of Base Drive R, Base Drive G and Base Drive B, and it is
not necessary to set the value of others.
WB MENU
Base Drive R
Base Drive G
Base Drive B
Color Temp
Drive R
Drive G
Drive B
WB Source
Drive R
Drive G
Drive B
Cutoff R
Cutoff G
Cutoff B
3. Exit the Service Mode.
After adjustment, confirm white balance again by normal picture.
Note:
Maybe BASE data for each TV set is different. And the items are for factory setting and Service Centre.
+0
+0
+0
Normal
+0
+0
+0
CVBS2
+0
+0
+0
+0
+0
+0
-6-