Huawei SUN2000-8KTL-M0 User Manual page 9

SUN2000-(12KTL, 15KTL, 17KTL, 20KTL)-M0
User Manual
●
●
●
Personnel Requirements
●
●
●
●
●
Protecting Labels
Do not scrawl, damage, or block any warning label on the device.
Installation
Never power on the SUN2000 during installation.
●
●
●
●
●
Grounding
●
●
Electrical Connections
Before connecting cables, ensure that the SUN2000 is secured in position and not
damaged in any way. Otherwise, electric shock or fire may occur.
Issue 06 (2020-07-02)
Device damage due to force majeure (such as earthquake, fire, and storm)
Warranty expiration without extension of warranty service.
Installation or use in environments which are not specified in relevant
international standards
Operation personnel should receive professional training.
Operation personnel should read through this document and follow all the
precautions.
Operation personnel should be familiar with the safety standards relevant to
electrical systems.
Operation personnel should understand the composition and working
principles of the grid-tied PV system and be aware of local regulations.
Operation personnel must wear proper personal protective equipment (PPE).
D ANGER
Ensure that the SUN2000 is not connected to a power supply or powered on
before finishing installation.
Ensure that the SUN2000 is installed in a well-ventilated environment.
Ensure that the SUN2000 heat sinks are free from blockage.
Do not open the front panel of the SUN2000.
Do not remove the terminals and ports at the bottom of the SUN2000.
When installing the device, always make the ground connection first and
disconnect it in the end.
Do not damage the ground conductor.
D ANGER
Copyright © Huawei Technologies Co., Ltd.
1 Safety Precautions
2