Allen + Roth L-GZ401PCO-C1 Assembly Instructions Manual

Allen + Roth L-GZ401PCO-C1 Assembly Instructions Manual

Hardtop
Table of Contents

Advertisement

Available languages

Available languages

ATTACH YOUR RECEIPT HERE
Serial Number
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Friday.
EB 16298
Purchase Date
1
ITEM #0732511
HARDTOP GAZEBO
MODEL
#L-GZ401PCO-C1
Français p. 28
allenandroth.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L-GZ401PCO-C1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Allen + Roth L-GZ401PCO-C1

  • Page 1 ITEM #0732511 HARDTOP GAZEBO MODEL #L-GZ401PCO-C1 Français p. 28 ATTACH YOUR RECEIPT HERE Purchase Date Serial Number Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Friday.
  • Page 2: Package Contents

    PACKAGE CONTENTS C2 I2 allenandroth.com...
  • Page 3 PACKAGE CONTENTS DESCRIPTION QUANTITY PART Long Decorative Gutter Short Decorative Gutter Corner Decorative Gutter 1 Corner Decorative Gutter 2 Middle Beam Connector Decorative Gutter Connector Corner Connector Long Mosquito Netting Tube Short Mosquito Netting Tube Top Slanting Bar Big Top Frame Middle Beam Left Long Support Beam of Big Top Long Side Right Long Support Beam of Big Top Long Side...
  • Page 4: Hardware Contents

    PACKAGE CONTENTS PART DESCRIPTION QUANTITY Top Block Block Plate Short Right Arc Support Short Left Arc Support Long Right Arc Support Long Left Arc Support Left Long Big Top Cover Right Long Big Top Cover Left Middle Big Top Cover Right Middle Big Top Cover Left Small Big Top Cover Right Small Big Top Cover...
  • Page 5: Safety Information

    HARDWARE CONTENTS ¢8 X 260 mm M6 x 55 mm M6 x 40 mm M6 Nut Long Screw Middle Screw Stake Qty. 16 + 1 spare Qty. 16 + 1 spare Qty. 8 + 1 spare Qty. 16 M6 x 20 mm Wrench Long Bolt ¢8 X 80 mm...
  • Page 6 SAFETY INFORMATION WARNING ‡ &KHFN DOO QXWV DQG EROWV SHULRGLFDOO\ IRU WLJKWQHVV DQG ZKHQ UHTXLUHG WLJKWHQ WKHP again. ‡ :KLOH WKLV JD]HER LV PDQXIDFWXUHG WR ZLWKVWDQG ZLQGV WKURXJK RQO\ WKH VXSSOLHG ground stakes, in areas subject to frequent severe weather, securing the gazebo to a deck, concrete patio or footings should be considered.
  • Page 7 ASSEMBLY INSTRUCTIONS Fig.1 Fig.3 Fig.2 Fig.5 Fig.6 Fig.4 1.Connect decorative gutter connectors (F1) and corner decorative gutters 1 (C1) using short bolts (CC) and flat washers (BB). Repeat this step for decorative gutter connectors (F1) and corner decorative gutters 2 (D1). Tighten with wrench (LL). Hardware Used x 16 M6 Flat Washer...
  • Page 8 ASSEMBLY INSTRUCTIONS 3. Insert short decorative gutters (B1) into corner decorative gutters 1 (C1) and corner decorative gutters 2 (D1) using short bolts (CC) and flat washers (BB). Tighten with wrench (LL). Note: Ensure to insert B1 into the end labeled for such on parts C1 and D1.
  • Page 9 ASSEMBLY INSTRUCTIONS 6. Attach plastic caps (AA) to one end of 11 6 each netting tube, then insert 7 hooks (JJ) into the inside rail of long mosquito netting tube (H1) as shown and 6 hooks (JJ) into the inside rail of short mosquito netting tubes (I1).
  • Page 10 ASSEMBLY INSTRUCTIONS Fig.9 Fig.10 Fig.8 Fig.12 Fig.11 Fig.13 8. Attach the lower ends of top slanting bars (A2) to the corner connectors (G1) using 12-1 long screws (EE), flat washers (BB) and nuts (FF). Tighten with screwdriver (not included). Hardware Used M6 Flat Washer M6 x 55 mm Long Screw...
  • Page 11 ASSEMBLY INSTRUCTIONS 10. Attach the top ends of middle beams (C2) to the big top frame (B2) using short bolts (CC) and flat washers (BB). Tighten with wrench (LL). Hardware Used M6 Flat Washer M6 x 15 mm Short Bolt M6 Wrench 11.
  • Page 12 ASSEMBLY INSTRUCTIONS 13. Attach the other end of left long support beams of big top long side (D2) to top slanting bars (A2) using short screws (DD) and flat washers (BB). Tighten with screwdriver. Repeat steps 12-13 for remaining big top beams (E2, F2, G2, H2, I2, J2, K2).
  • Page 13 ASSEMBLY INSTRUCTIONS 14. Attach the top ends of small top bottom beams 1 (A3) and small top bottom beams 2 (F3) to small top connector (G3) using hooded nuts (KK) and flat washers (BB). Screw the chandelier hook (J3) to small top connector (G3).
  • Page 14 ASSEMBLY INSTRUCTIONS 17. Place roof covers of small top long side (C3) and roof covers of small top short side (D3) onto small top. 18. Attach small top sheetings (B3) to small top bottom beams 1 (A3) and small top bottom beams 2 (F3) using short screws (DD) and flat washers (BB).
  • Page 15 ASSEMBLY INSTRUCTIONS Fig.23 Fig.24 Fig.22 Fig.25 Fig.26 Fig.27 Fig.20 20. Insert the posts (C4) into the base covers (B4), and then install the post bases (A4) to the bottoms of posts (C4) using short screws (DD) and flat washers (BB). Tighten with screwdriver. Hardware Used M6 Flat Washer x 16...
  • Page 16 ASSEMBLY INSTRUCTIONS 21. Attach the top blocks (D4) to top of the posts (C4) using long bolts (MM) and flat washers (BB). Tighten with wrench (LL) Note: The screw holes on the posts and the screw holes on the block plates must align as shown in order to secure the connection properly.
  • Page 17 ASSEMBLY INSTRUCTIONS 24. Attach the block plates (E4) to the top blocks (D4) using small screws (DD) and flat washers (BB). Tighten with screwdriver. Hardware Used M6 Flat Washer M6 x 15 mm Short Screw 25. Attach the top ends of short right arc supports (F4) to decorative gutters and the other end to posts (C4) using long bolts (MM) and flat washers (BB).
  • Page 18 ASSEMBLY INSTRUCTIONS Fig.28 Fig.29 Fig.27 27. Press left long big top covers (A5) to right long big top covers (B5). 28. Insert each assembly from the previous step into the U-grooves on each side of the big top frame (B2). Repeat this step for short big top cover (G5) allenandroth.com...
  • Page 19 ASSEMBLY INSTRUCTIONS 29. Attach left long big top covers (A5) and short big top covers (G5) to top slanting bars (A2) using small screws (DD) and flat washers (BB). Tighten with screwdriver. Hardware Used M6 Flat Washer M6 x 15 mm Short Screw Fig.33 Fig.34...
  • Page 20 ASSEMBLY INSTRUCTIONS 31. Attach right small big top covers (F5) and left small big top covers (E5) to top slanting bars (A2) using small screws (DD) and flat washers (BB). Tighten with screwdriver. Hardware Used M6 Flat Washer M6 x 15 mm Short Screw 32.
  • Page 21 ASSEMBLY INSTRUCTIONS 34. Attach the top cover (H5) to top slanting bars (A2) using middle screws (GG) and flat washers (BB). Tighten with screwdriver. Hardware Used M6 Flat Washer M6 x 40 mm Middle Screw 35. Hang the mosquito netting (J5) onto long mosquito netting tubes (H1) and short mosquito netting tubes (I1) by hooks (JJ).
  • Page 22: Care And Maintenance

    CARE AND MAINTENANCE ‡ 6WHHO FRPSRQHQWV IRU WKLV JD]HER DUH WUHDWHG ZLWK UXVW LQKLELWLQJ SDLQW WKDW protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur if these protective coatings are scratched. This is not a defect and thus not covered by the warranty.
  • Page 23: Replacement Parts List

    REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Friday. allenandroth.com...
  • Page 24 REPLACEMENT PARTS LIST allenandroth.com...
  • Page 25 REPLACEMENT PARTS LIST allenandroth.com...
  • Page 26 REPLACEMENT PARTS LIST PART DESCRIPTION PART# Long Decorative Gutter 0732511-A1 Short Decorative Gutter 0732511-B1 Corner Decorative Gutter 1 0732511-C1 Corner Decorative Gutter 2 0732511-D1 Middle Beam Connector 0732511-E1 Decorative Gutter Connector 0732511-F1 Corner Connector 0732511-G1 Long Mosquito Netting Tube 0732511-H1 Long MidShort Mosquito Netting Tube 0732511-I1 Top Slanting Bar...
  • Page 27 ¢8 X 80 mm Anchor 0732511-II Hook 0732511-JJ M6 Hooded Nut 0732511-KK M6 Wrench 0732511-LL M6 x 20 mm Long Bolt 0732511-MM Printed in China allen + roth® is a registered trademark of LF, LLC. All Rights Reserved. allenandroth.com allenandroth.com...
  • Page 28 ARTICLE # 0732511 PAVILLON DE JARDIN À TOIT RIGIDE MODÈLE # L-GZ401PCO-C1 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 866 439-9800, entre 8 h et 20 h (HNE), du lundi au vendredi.
  • Page 29: Contenu De L'emballage

    CONTENU DE L’EMBALLAGE C2 I2 allenandroth.com...
  • Page 30 CONTENU DE L’EMBALLAGE PIÈCE DESCRIPTION QUANTITÉ Gouttière décorative longue Gouttière décorative courte Gouttière décorative en coin 1 Gouttière décorative en coin 2 Raccord de traverse centrale Raccord de gouttière décorative Raccord de coin Tube de moustiquaire long Tube de moustiquaire court Barre inclinée supérieure Armature du grand toit Poutrelle centrale...
  • Page 31 CONTENU DE L’EMBALLAGE PIÈCE DESCRIPTION QUANTITY Bloc supérieur Plaque du bloc Arche de soutien court de droite Arche de soutien court de gauche Arche de soutien long de droite Arche de soutien long de gauche Long panneau gauche du grand toit Long panneau droit du grand toit Long panneau central gauche du grand toit Long panneau central droit du grand toit...
  • Page 32: Consignes De Sécurité

    QUINCAILLERIE INCLUSE (grandeur non réelle) Vis longue Vis centrale Piquet Écrou M6 ¢ [  PP M6 de 55 m M6 de 40 mm Qté 16 + 1 Qté 16 + 1 Qté 8 + 1 Qté de rechange de rechange de rechange Clé...
  • Page 33 CONSIGNES DE SÉCURITÉ AVERTISSEMENT ‡ %LHQ TXH FH SDYLOORQ GH MDUGLQ VRLW IDEULTXp SRXU UpVLVWHU DX[ YHQWV j O¶DLGH GHV piquets de sol seulement, s’il est installé dans un endroit fréquemment touché SDU GX WHPSV YLROHQW RQ GHYUDLW HQYLVDJHU GH OH IL[HU j XQH WHUUDVVH j XQH terrasse en béton ou à...
  • Page 34: Instructions Pour L'assemblage

    INSTRUCTIONS POUR L’ASSEMBLAGE Fig. 1 Fig. 3 Fig. 2 Fig. 5 Fig. 6 Fig. 4  )L[H] OHV UDFFRUGV GH JRXWWLqUH GpFRUDWLYH (F1) et les gouttières décoratives en coin 1 (C1) à l’aide des boulons courts (CC) et des rondelles plates (BB). Répétez cette étape pour les raccords de gouttière décorative (F1) et les gouttières décoratives en coin 2 (D1).
  • Page 35 INSTRUCTIONS POUR L’ASSEMBLAGE 3. Insérez les gouttières décoratives courtes (B1) dans les gouttières décoratives en coin 1 (C1) et les gouttières décoratives en coin 2 (D1) à l’aide des boulons courts (CC) et des rondelles plates (BB).Serrez à l’aide de la clé (LL). Remarque : Veillez à...
  • Page 36 INSTRUCTIONS POUR L’ASSEMBLAGE  )L[H] OHV FDSXFKRQV HQ SODVWLTXH $$ j 11 6 XQH H[WUpPLWp GH FKDTXH WXEH GH moustiquaire, puis insérez 7 crochets (JJ) à l’intérieur du rail du long tube de moustiquaire (H1) comme sur l’illustration et 6 crochets (JJ) à l’intérieur du rail des ORQJV WXEHV GH PRXVWLTXDLUH ,  )L[H] ensuite les capuchons en plastique (AA) DX[ DXWUHV H[WUpPLWpV GH FKDFXQ GHV...
  • Page 37 INSTRUCTIONS POUR L’ASSEMBLAGE Fig. 9 Fig. 10 Fig. 8 Fig. 12 Fig. 11 Fig. 13 8. )L[H] OHV H[WUpPLWpV LQIpULHXUHV GHV EDUUHV LQFOLQpHV VXSpULHXUHV $ DX[ UDFFRUGV 12-1 de coin (G1) à l’aide des longues vis (EE), des rondelles plates (BB) et des écrous (FF).
  • Page 38 INSTRUCTIONS POUR L’ASSEMBLAGE  )L[H] OHV H[WUpPLWpV VXSpULHXUHV GHV traverses centrales (C2) à l’armature du grand toit (B2) à l’aide des boulons courts (CC) et des rondelles plates (BB). Serrez le tout avec la clé (LL). Quincaillerie utilisée Rondelle plate M6 Boulon court M6 de 15 mm Clé...
  • Page 39 INSTRUCTIONS POUR L’ASSEMBLAGE  )L[H] O¶DXWUH H[WUpPLWp GHV ORQJXHV traverses de soutien gauches du long F{Wp GX JUDQG WRLW ' DX[ EDUUHV inclinées supérieures (A2) à l’aide des petites vis (DD) et des rondelles plates (BB). Serrez le tout avec un tournevis cruciforme.
  • Page 40 INSTRUCTIONS POUR L’ASSEMBLAGE  )L[H] OHV H[WUpPLWpV VXSpULHXUHV GHV traverses inférieures du petit toit 1 (A3) et des traverses inférieures du petit toit 2 (F3) au raccord du petit toit (G3) à l’aide des écrous à capuchon (KK) et des rondelles plates (BB).
  • Page 41 INSTRUCTIONS POUR L’ASSEMBLAGE  3ODFH] OHV SDQQHDX[ GH WRLW GX ORQJ F{Wp GX SHWLW WRLW & HW OHV SDQQHDX[ GH WRLW du côté court du petit toit (D3) sur le petit toit.  )L[H] OHV UHYrWHPHQWV GX SHWLW WRLW % DX[ WUDYHUVHV LQIpULHXUHV GX SHWLW WRLW  $ HW DX[ WUDYHUVHV LQIpULHXUHV GX SHWLW toit 2 (F3) à...
  • Page 42 INSTRUCTIONS POUR L’ASSEMBLAGE Fig. 23 Fig. 24 Fig. 22 Fig. 25 Fig. 26 Fig. 27 Fig. 20 20. Insérez les montants (C4) dans les capuchons de pied (B4), puis installez les bases des montants (A4) dans le bas des montants (C4) à l’aide des vis courtes (DD) et des rondelles plates (BB).
  • Page 43 INSTRUCTIONS POUR L’ASSEMBLAGE  )L[H] OHV EORFV VXSpULHXUV ' j OD SDUWLH supérieure des montants (C4) à l’aide des boulons longs (MM) et des rondelles plates (BB). Serrez à l’aide de la clé (LL) Remarque : Les trous de vis sur les montants et les trous de vis sur les plaques des blocs doivent être alignés conformément à...
  • Page 44 INSTRUCTIONS POUR L’ASSEMBLAGE  )L[H] OHV SODTXHV GHV EORFV ( DX[ blocs supérieurs (D4) à l’aide des petites vis (DD) et des rondelles plates (BB). Serrez à l’aide d’un tournevis. Quincaillerie utilisée Rondelle plate M6 Vis courte M6 de 15 mm  )L[H] OHV H[WUpPLWpV VXSpULHXUHV GH l’arche de soutien court de droite (F4) DX[ JRXWWLqUHV GpFRUDWLYHV HW O¶DXWUH...
  • Page 45 INSTRUCTIONS POUR L’ASSEMBLAGE Fig. 28 Fig. 29 Fig. 27  $SSX\H] OHV ORQJV SDQQHDX[ JDXFKHV GX JUDQG WRLW $ VXU OHV ORQJV SDQQHDX[ droits du grand toit (B5). 28. Insérez chaque ensemble de l’étape précédente dans les rainures en U de chaque côté...
  • Page 46 INSTRUCTIONS POUR L’ASSEMBLAGE  )L[H] OHV ORQJV SDQQHDX[ JDXFKHV GX JUDQG WRLW $ HW OHV SDQQHDX[ FRXUWV GX JUDQG WRLW * DX[ EDUUHV LQFOLQpHV supérieures (A2) à l’aide des petites vis (DD) et des rondelles plates (BB). Serrez à l’aide d’un tournevis. Quincaillerie utilisée Rondelle plate M6 Vis courte M6...
  • Page 47 INSTRUCTIONS POUR L’ASSEMBLAGE  )L[H] OHV SHWLWV SDQQHDX[ FHQWUDX[ GURLWV GX JUDQG WRLW ) HW OHV SHWLWV SDQQHDX[ JDXFKHV GX JUDQG WRLW ( DX[ EDUUHV inclinées supérieures (A2) à l’aide des petites vis (DD) et des rondelles plates (BB). Serrez le tout avec un tournevis cruciforme.
  • Page 48 INSTRUCTIONS POUR L’ASSEMBLAGE  )L[H] OH SDQQHDX VXSpULHXU + DX[ barres inclinées supérieures (A2) à l’aide des vis moyennes (GG) et des rondelles plates (BB). Serrez à l’aide d’un tournevis. Quincaillerie utilisée Rondelle plate M6 Vis centrale M6 de 40 mm 35.
  • Page 49: Entretien

    ENTRETIEN ‡ /HV SLqFHV HQ DFLHU GH FH SDYLOORQ GH MDUGLQ VRQW WUDLWpHV DYHF XQH SHLQWXUH DQWLURXLOOH 7RXWHIRLV HQ UDLVRQ GH OD QDWXUH GH O¶DFLHU XQH R[\GDWLRQ GH OD VXUIDFH (rouille) peut se produire si cette couche protectrice est égratignée. La garantie ne couvre pas ce problème puisqu’il ne s’agit pas d’un défaut.
  • Page 50: Liste Des Pièces De Rechange

    LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, veuillez communiquer avec notre service à la clientèle au 1 866 439-9800, entre 8 h et 20 h (HNE), du lundi au vendredi. allenandroth.com...
  • Page 51 LISTE DES PIÈCES DE RECHANGE allenandroth.com...
  • Page 52 LISTE DES PIÈCES DE RECHANGE allenandroth.com...
  • Page 53 LISTE DES PIÈCES DE RECHANGE PIÈCE DESCRIPTION QUANTITÉ Gouttière décorative longue 0732511-A1 Gouttière décorative courte 0732511-B1 Gouttière décorative en coin 1 0732511-C1 Gouttière décorative en coin 2 0732511-D1 Raccord de traverse centrale 0732511-E1 Raccord de gouttière décorative 0732511-F1 Raccord de coin 0732511-G1 Tube de moustiquaire long 0732511-H1...
  • Page 54 Cheville d’ancrage¢ [  PP 0732511-II Crochet 0732511-JJ Écrou à capuchon M6 0732511-KK Clé M6 0732511-LL Boulon long M6 de 20 mm 0732511-MM Imprimé en Chine allen + roth® est une marque de commerce déposée de LF, LLC. Tous droits réservés. allenandroth.com allenandroth.com...

This manual is also suitable for:

0732511

Table of Contents