Valcom V-9972 Quick Start Manual

INTRODUCTION
The V-9972 Universal Paging Interface is designed to
provide access to paging systems from an analog station
port (FXS, PABX), PABX loop start trunk port (FXO) or
SIP (Session Initiation Protocol) voice over IP
connections.
SPECIFICATIONS
Access Methods

FXS extension

PABX station extension

Electronic key system line key

PABX loop start trunk port

Standard telephone

SIP (Session Initiation Protocol)
Electrical Specifications
FXO Input
Ring Detect Voltage
REN
FXS Input
DC Open Circuit Voltage
DC Feed Circuit
DC Differential Output Resistance
Ringing Amplitude (nominal, open circuit)
Ring Frequency
Audio Sense Release:
Time Out Release:
Talkback Page Out (FXO Output)
Impedance:
Page Level Output:
One Way Page Out
Impedance:
Page Level:
Music Level:
Music Input Impedance:
Answer Verification Tone: User Programmable
Form C Contacts:
UNIVERSAL PAGING INTERFACE
13.5V Min.
0.2
-48V Nominal
45mA Max
160-640 Ohms
108V peak
20Hz
2,4, or 8 seconds
or programmable
8, 16, or 128 seconds
or programmable
600 Ohms
-10dBm Nominal
Min. 8 Ohms
-10dBm to 0dBm
-17dBm to 0dBm
10k Ohms
-23dBm to 0dBm
24VDC, 1.0 Amps
V-9972
Features

Use with SIP (Session Initiation Protocol) VoIP PBX

Use with Valcom multi-zone page control unit with
FXS or analog station ports (DTMF signaling only)

Use with Valcom handsfree page units for talkback
paging

Multiple units may be connected for multi-zone paging
with all call behind a PABX

Background music, stereo or mono input; music
mutes during page

Volume controls for background music and tones

Security code option to restrict page access

Store & Play feedback eliminator option

Multiple disconnect options

Page verification tone

Customizable Page alert tone

Drive up to 150 one-way amplified speakers on 8
Ohm output (one-way output)

Web interface for programming extended functions
The following features can be enabled with additional
license purchase:

SIP expanded to 4 extensions, with Night Ring and
Store & Play on all lines
Dimensions/Weight
Single unit:
9.25" W x 10.12" D x 1.72" H
(23.49cm W x 25.70cm D x 4.36cm H)
Weight 2.5 lbs (1.134 kgs)
Two units mounted for 19" Rack:
19.0" W x 10.12" D x 1.72" H
(48.26cm W x 25.70cm D x 4.36cm H)
Weight 5.1 lbs (2.313 kg)
Environment
Temperature:
Humidity:
These products are intended for use with a UL Listed
power source marked "Class 2" or "LPS" rated 24VDC.
All interconnected ITE are intended for intra-building.
1
Issue 2
0 to +50°C
0 to 80% (non-precipitating)
947573