English Application Remove retaining rings (B) with installation tool (B1), see Fig. [6]. In order to ensure correct operation, a pressure of at least 21.75 psi is necessary at the shower system. Detach wall plate (B2). Caution: Insert mounting plug (C1), see Fig. [7]. With sufficient power (from 18 kW) electric or gas instantaneous heaters Guide elbow unions (A) through the area provided in the fitting are also suitable.
English Temperature limitation Shut off cold and hot water supply. The safety stop limits the temperature range to 100 °F. If a higher temperature is desired, the 100 °F limit can be overridden by II. Thermostatic cartridge, see fold-out page VI, Fig. [17]. pressing the button (J3).
Need help?
Do you have a question about the 27 016 and is the answer not in the manual?
Questions and answers