To begin using SPOT Gen4, we recommend you spend a few minutes reading through this User Guide, then
visit FindMeSPOT.com to select a service plan and activate your SPOT Gen4.
BUTTON TEST LED CHART
BUTTONS
HELP LED
PRESSED
TRACK
GREEN
+ POWER
RED
S.O.S. + HELP
CUSTOM
GREEN
MESSAGE
+ OK
SECTION 2: GETTING STARTED
Your SPOT Gen4 requires an active SPOT subscription to communicate. To do this, simply activate your
device using the instructions outlined below.
WITH YOUR SPOT GEN4
WHAT YOU NEED
•
Your SPOT Gen4
•
One of these power sources:
•
4 AAA Energizer
•
4 AAA Energizer
•
User Guide
INSTALL THE INCLUDED BATTERIES
1.
A coin or pocket knife can be used to loosen the screws to open the battery cover.
2. Write down the ESN and Authorization Code for use during service activation.
3. Install 4 AAA Energizer
4. Replace cover and tighten screws fully to maintain SPOT Gen4's waterproof seal.
5. Keep your batteries installed.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
POWER
S.O.S. LED
LED
GREEN
N/A
RED
RED
GREEN
GREEN
Ultimate Lithium 8x batteries (L92); included
®
NiMH rechargeable batteries (NH12)
®
Ultimate Lithium 8x batteries or NiMH rechargeable batteries.
®
according to the instructions.
GPS LED
SEND LED
N/A
N/A
RED
RED
GREEN
GREEN
3
CUSTOM
TRACK
MESSAGE
LED
LED
N/A
N/A
RED
RED
GREEN
GREEN
CHECK IN
LED
N/A
RED
GREEN