Table of Contents
Advertisement
End of Cycle signal
(on some
models)
The dyer sounds a signal to let you know
l
On some dyers, the end of cycle signal is
Lil
JQ
when the cycle is finished. The
not adjustable.
signal is helpful when you are
.l
drying permanent press,
l
On other dyers, the end of cycle signal
',
synthetics, and other items
can be turned On or Off by a selector. The
that should be removed from
end of cycle On/Off selector is part of the
Start Button on some models. The various
the dyer as soon as it stops.
types of selectors are described in the
chart below.
Using
End of Cycle signal
and
FINISH GUARD@ feature
(on some
models)
If your dyer has the end of cycle signal
Your model may have one of the following:
and/or FINISH GUARD feature, they may be
l
Separate knob selectors for end of cycle
turned On or Off as shown below.
signal and FINISH GUARD feature.
NOTE: Unless you turn Off the FINISH
l
CLEAN TOUCHTM pushbutton
pad for
GUARD feature, it operates at the end of
both features.
the cycle.
Finish Guard
Finish Guard
Finish Guard
11
Advertisement
Table of Contents
