This manual provides the information how to use WIFI/Bluetooth interface. We at POSBANK maintain ongoing efforts to enhance and upgrade the functions and quality of all our products. In following, product specifications and/or user manual contents may be changed without prior notice.
4) After below content is printed, press “Feed” button once, select “WiFi SoftAP”. Setting the Wireless Mode 1. WiFi SoftAP * 2. WiFi Station 3. Bluetooth 5) When you search WIFI on the PC which WiFi Dongle is installed, you can see AP which is written as “A8_PRINTER_XXXXXX”. www.POSBANK.com...
Page 5
8) If you access by entering SSID directly, select “[Direct Input]” on Combo Box and enter “SSID” and “PASS” of AP. If you download IP address information with DHCP server, uncheck “STATIC” and enter “IP/GW/SN”. 9) After inputting all items, click “Apply”. www.POSBANK.com...
Page 6
10) “Connection Failed!!” message pops up as below if you fail to access AP. 11) When the connection is succeeded, “Successfully Connected!!” message is displayed as below and it works as “WiFi Station” mode from next time. www.POSBANK.com...
Page 7
12) When you turn off and press “Feed” button and then press “Power” button, you can see the setting as below. ( Model : A8 PRIME ) F/W P1.09-CAP06[2019/04/24] **************************************************** ………….. [ USB Mode ] - - - - - - - - - - - - -> Actual USB [ Paper Width ] - - - - - - - - - - - ->...
18. Wireless Mode 19. Black Mark Mode 20. Auto Load Mode 21. Sensing Level 4) After below content is printed, press “Feed” button 3 times and select “Bluetooth”. Setting the Wireless Mode 1. WiFi SoftAP * 2. WiFi Station 3. Bluetooth www.POSBANK.com...
Page 9
5) When you turn off A8 Printer and turn on by pressing and holding “Feed” button, you can see the configured Bluetooth information as below. ( Model : A8 PRIME ) F/W P1.09-CAP06[2019/04/24] **************************************************** ………….. [ USB Mode ] - - - - - - - - - - -> Actual USB [ Paper Width ] - - - - - - - - - ->...
4) After below content is printed, press “Feed” button once and select “WiFi SoftAP”. Setting the Wireless Mode 1. WiFi SoftAP * 2. WiFi Station 3. Bluetooth 5) When you search WIFI on the PC which WiFi Dongle is installed, you can see AP which is written as “A8_PRIME_XXXXXX”. www.POSBANK.com...
Page 11
6) Open the Web browser, type the IP address http://192.168.192.1/update and load setup page as below. 7) When you click the “Browse”, files window is displayed as below. www.POSBANK.com...
Page 12
8) Select new Firmware file and click “open”. 9) When you click “Update” after selecting Firmware file, the button is changed to “Wait” and wait until the firmware update is complete. www.POSBANK.com...
Page 13
10) When the firmware update is complete successfully, below screen is displayed and restart the printer. 11) If it is abnormal firmware file or problems occur during the update, below screen will be displayed and it will work with current firmware. www.POSBANK.com...
When you press “FEED” button twice, Factory Reset is cancelled. ESP32 Module : WiFi + Bluetooth 1. Perform factory reset Press the FEED button once. 2. Factory reset is not performed Press the FEED button twice. It will restart automatically ==================================== - End - www.POSBANK.com...
Need help?
Do you have a question about the A8 PRIME and is the answer not in the manual?
Questions and answers