Subscribe to Our Youtube Channel
Related Manuals for POSBank A7EN
Summary of Contents for POSBank A7EN
- Page 1 Ethernet Interface Setting Manual A7EN Receipt Printer User’s Manual (Revision 1.0.1) 2015-11-11 www.POSBANK.com...
-
Page 2: Table Of Contents
Manual Information ..................................3 Specifications ....................................3 Web Server ..................................... 4 3-1 Static IP interface set up ..............................4 3-2. DHCP interface setup ................................8 Ethernet test by using Windows Test Page ........................8 Printer Setup Status ..................................9 www.POSBANK.com... -
Page 3: Manual Information
1. Manual Information The purpose of this manual is to provide information on the operation and usage instructions of the Ethernet Interface for the POSBANK Printers. 2. Specifications TCP, UDP, ICMP, IPv4, ARP, IGMP 10 Base-T / 100 Base-TX Ethernet PHY Embedded Support Auto-Negotiation (Full &... -
Page 4: Web Server
2) Enter IP address of the printer at Address of Internet Browser and click go. [Note] If you are not aware of IP address, check IP address by pushing FEED Button. Ask Network administrator IP Address and its related information. www.POSBANK.com... - Page 5 ① When the Network is connected to Internet (Router or Server computer), Refer to the Network setting of other computers on the Network. ② When the Network is connected to Internet (Router or Server computer), Enter 0,0,0,0 for Gateway. www.POSBANK.com...
- Page 6 4) Enter value of Local Port. 5) Set Inactivity Time [Note] Inactivity time은 Host(PC)가 프린터의 TCP port에 연결을 하였을 때 Inactivity time동안 데이터 전송이 없으면 프린터가 강제로 연결을 종료하는 기능입니다. 여러 Host에서 하나의 www.POSBANK.com...
- Page 7 Default value is 0. Choose from 0 to 32767(0x7fff). (최대 9시간 6분 7초) When you set Inactivity time, Ethernet interface will disconnect by force after designated time. When you set 0, Forced disconnection function is not available. 6) When setting finishes, click Apply. www.POSBANK.com...
-
Page 8: Dhcp Interface Setup
2) Push the FEED Button on the interface 10 or more seconds from finishing setup up. Enter given IP address at address of Internet Browser to enter web server. 4. Ethernet test by using Windows Test Page Refer to Windows Driver Manual www.POSBANK.com... -
Page 9: Printer Setup Status
5. Printer Setup Status Example A7EN POS PRINTER Firmware Version P0.55[2015/03/09] ****************************************** [ Emulation ] - - - - - -> Epson [ Characters ] - - - - - -> 42 Char/Line [ Temperature ] - - - - -> 28.4 [ Print Density ] - - - ->...
Need help?
Do you have a question about the A7EN and is the answer not in the manual?
Questions and answers