Related Manuals for POSBank A8 Prime
Summary of Contents for POSBank A8 Prime
- Page 1 Ethernet Interface Setting Manual A8 PRIME Receipt Printer User Manual (Revision 1.0.1) 2019-07-23 www.POSBANK.com...
-
Page 2: Table Of Contents
Product Specification ................................. 3 Settings via Web Serveer ................................. 4 3-1 Static IP Setup ................................... 4 3-2. DHCP (Dynamic IP) Setup ..............................8 Test through Windows Driver’s “Print Test Page” ......................8 Ping Test ......................................9 Check Printer Settings ................................10 www.POSBANK.com... -
Page 3: Manual Information
1. Manual Information This manual describes how to use the Ethernet interface. POSBANK is continiuously improviing the function and quality of products. As such, the specifications of the product and the contents of the manual are subject to change without prior notice. -
Page 4: Settings Via Web Serveer
3) Enter the printer’s IP in the Internet Browser address field and click “Go”. [Note] If you do not know the IP address, check the currently set IP through the self-test function of the printer. Contact your network administrator for IP and related information. www.POSBANK.com... - Page 5 ① If the network is connected to the internet (connected to a router or a server computer), refer to the network information of the computers on the same network. ② If the network is not connected to the internet (not connected to a router or a server computer), input 0.0.0.0. www.POSBANK.com...
- Page 6 5) “Local Port” Setting Default = 9100, Windows driver is also installed / operated on port 9100. If changed to a different port number, the port number of the Windows driver and application program must be changed. 6) “Inactivity Time” Setting www.POSBANK.com...
- Page 7 Default value is 0, value can be changed to 0 ~ 32767(0x7fff). (Up to 9 hours 6 minutes 7 seconds) If Inactivity time is specified, the Ethernet connect will be disconnected after the set time. If set to “0”, forced disconnection function will not work. 7) When finished, press “Apply”. www.POSBANK.com...
-
Page 8: Dhcp (Dynamic Ip) Setup
When changing DHCP mode from Enable to Disable, the network related information will be changed to the factory default value. (IP=192.168.10.10, Subnet Mask=255.255.255.0, Gateway=192.168.10.1, Local Port=9100, Inactivity Time=0) 4. Test through Windows Driver’s “Print Test Page” Refer to the User’s Manual of the Windows driver www.POSBANK.com... -
Page 9: Ping Test
5. Ping Test 1) In Command Prompt (cmd.exe) ping 192.168.xxx.xxx to test connectivity www.POSBANK.com... -
Page 10: Check Printer Settings
6. Check Printer Settings ( Model : A8 PRIME ) F/W P1.09-CAP06[2019/04/24] ****************************************** [ Print Speed ] - - - - - -> Lv1 [250mm/s] [ Print Density ] - - - - -> Lv1 [LIGHT ] [ Characters ] - - - - - -> 42 Char/Line [ Temperature ] - - - - - ->...
Need help?
Do you have a question about the A8 Prime and is the answer not in the manual?
Questions and answers