IBM Elastic Storage System 3000 Service Manual page 14

Table 3. Events for the Canister component (continued)
Event Event Type
bootdrive_mirror_failed STATE_CHANG
E
bootdrive_mirror_ok STATE_CHANG
E
bootdrive_mirror STATE_CHANG
_unconfigured E
bootdrive_missing STATE_CHANG
E
bootdrive_smart_failed STATE_CHANG
E
bootdrive_smart_ok STATE_CHANG
E
can_fan_failed STATE_CHANG
E
can_fan_ok STATE_CHANG
E
can_temp_bus_failed STATE_CHANG
E
can_temp_high_critical STATE_CHANG
E
can_temp_high_warn STATE_CHANG
E
can_temp_low_critical STATE_CHANG
E
2 IBM Elastic Storage System 3000: Service Guide
Severity Message
ERROR The bootdrive's
mirroring is failed.
INFO The bootdrive's
mirroring is OK.
WARNING The bootdrive's
mirroring is
unconfigured.
ERROR The bootdrive on
port {0} is missing or
dead.
ERROR The smart
assessment of
bootdrive {0}
attached to port {1}
does not return OK.
INFO The smart
assessment of
bootdrive {0}
attached to port {1}
returns OK.
WARNING Fan {0} is failed.
INFO Fan {0} is OK.
WARNING Temperature sensor
{0} I2C bus is failed.
WARNING Temperature sensor
{0} measured a high
temperature value.
WARNING Temperature sensor
{0} measured a high
temperature value.
WARNING Temperature sensor
{0} measured a low
temperature value.
Description Cause
The bootdrive's The
mirroring is failed. tsplatformstat
-a command returns
a FAILED value for
at least one partition.
The bootdrive's The
mirroring is OK. tsplatformstat
-a command returns
optimal for all
partitions.
The bootdrive's The
mirroring is tsplatformstat
unconfigured. -a command returns
unconfigured for
mirroring.
One bootdrive is The
missing or dead. tsplatformstat
Redundancy is not -a command returns
given anymore. only one instead of
two bootdrives. Two
drives are expected
to ensure
redundancy.
The bootdrive's The
smart assessment tsplatformstat
does not return OK. -a command does
not return a PASSED
value in the
selfAssessment
field for the
bootdrive.
The bootdrive's The
smart assessment tsplatformstat
returns OK. -a command returns
a PASSED in the
selfAssessment
field for the
bootdrive.
The fan state is The
failed. mmlsenclosure
command reports
the fan as failed.
The fan state is OK. The
mmlsenclosure
command reports
the fan as working.
The temperature The
sensor I2C bus mmlsenclosure
failed. command reports
the temperature
sensor with a failure.
The temperature The
exceeded the actual mmlsenclosure
high critical command reports
threshold value for at the temperature
least one sensor. sensor with a failure.
The temperature The
exceeded the actual mmlsenclosure
high warning command reports
threshold value for at the temperature
least one sensor. sensor with a failure.
The temperature has The
fallen below the mmlsenclosure
actual low critical command reports
threshold value for at the temperature
least one sensor. sensor with a failure.
User Action
N/A
N/A
N/A
Inspect that the drive is
correctly installed on the
referenced port. Else
insert or replace the drive.
Verify the smart status of
the bootdrive using
tsplatformstat
command or smartctl.
N/A
Check the fan status by
using the
mmlsenclosure
command. Replace the
fan module in the
canister.
N/A
Check the temperature
status by using the
mmlsenclosure
command.
Check the temperature
status by using the
mmlsenclosure
command.
Check the temperature
status by using the
mmlsenclosure
command.
Check the temperature
status by using the
mmlsenclosure
command.