Download Print this page

Fisher-Price R6153 Instruction Sheet page 5

Hide thumbs Also See for R6153:

Advertisement

5
Metal Tab
• Fit two pedal axle covers onto the pedal axle metal tabs. Make sure
the metal tabs fit into the slot in each pedal axle cover.
• While holding the pedal axle covers on the pedal axle, insert the
pedal axle into the hole in the center of the front wheel.
• Push the pedal axle covers into the center of the front wheel until
they are flush with the surface of the front wheel.
• Repeat this procedure with the other two pedal axle covers on the
other side of the front wheel assembly.
Front Wheel Assembly
Fork Cover
6
Pedal Axle
• Place the front wheel assembly between the fork arms so that the
pedal axle fits into the groove at the bottom of each fork arm.
• Place a fork cover over the pedal axle on one fork arm.
• Insert two #10 x ¾" screws into the fork cover and tighten.
• Repeat this procedure to attach the other fork cover to the other
fork arm, using the #10 x ¾" screws.
Assembly
Pedal Axle Cover
Pedal Axle
Slot
Pedal Axle Cover
Fork Arms
Groove
5
Fork Covers
7
• Turn the frame upright.
• Insert the fork post up through the
hole in the frame neck. Make sure the fork is positioned so that
the fork covers face the rear wheels.
• Place the handlebar over the fork post and push it down onto the
frame. Make sure the handlebar is positioned so that the screw
hole faces the rear wheels and aligns with the screw hole in the
fork post.
• Insert the #8 x 3" screw through the hole in the handlebar and into
the fork post so that part of the screw (about ¾") is still visible.
Tighten the screw.
8
• Insert the knobbed end of the footrest
up through the opening in the underside,
center of the frame
.
• Rotate the footrest ¼ turn
• Slide the footrest toward the handlebar as far as it will go until
the top of the footrest is positioned over the opening's
rectangular cut-out.
• Lower the knobbed end of the footrest into the rectangular cut-out
in the frame
.
Handlebar
Frame Neck
Fork Post
FIRST, insert the screw
so that ¾ " is visible.
THEN, tighten the screw.
¾ "
Knobbed End
Frame Opening
Footrest
Footrest
Knobbed End
Top View
.

Advertisement

loading