DEC DECpc 433 Service Manual page 3

June 1991
The information in this document is subject to change without notice and
should not be construed as a commitment by Digital Equipment Corporation.
Digital Equipment Corporation assumes no responsibility for any errors that
might appear in this document.
The software, if any, described in this document is furnished under a license
and may be used or copied only in accordance with the terms of such license.
No responsibility is assumed for the use or reliability of software or
equipment that is not supplied by Digital Equipment Corporation or its
affiliated companies.
Restricted Rights: Use, duplication, or disclosure by the U.S.
Govemml~nt
is
subject to restrictions as set forth in subparagraph (c) (1) (ii) of the Rights in
Technical Data and Computer Software clause at DFARS 252.227-7013.
DECpc 433 Workstation Service GuiJe
Copyright'!> Digital Equipment Corporation.
AH Rights Reserved.
Printed in U.S.A.
IBM, PC/XT/AT, and Personal System/2 are registered trademarks of
International Business Machines Cotporation.
Intel is a registered trademark of The Intel Corporation.
Microsoft, MS-DOS, MS 05/2, and XENIX are registered trademarks of
Microsoft Corporation.
SIMM is a registered trademark of Wang Laboratories.
Texas Instruments is a registered trademark of Texas Instruments
Incorporated.
NEC is a registered trademark of NEC Corporation.
Mitsubishi is a registered trademark of Mitsubishi Corporation.
Diagsoft is a registered trademark of Diagsoft.