Nexcom IWF 300 Series User Manual page 60

Chapter 2: System Configuration
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
RTS/CTS Threshold: Default=off. RTS/CTS (Request to
Send / Clear to Send) is the optional mechanism used by
the 802.11 wireless networking protocol to reduce frame
collisions introduced by the hidden node problem. RTS/CTS
is an additional method to implement virtual carrier sensing
in Carrier sense multiple access with collision avoidance
(CSMA/CA). Specify the RTS threshold by entering the value
manually [0-2346 bytes]. Typically, sending RTS/CTS frames
does not occur unless the packet size exceeds this threshold.
The Interface Configuration section covers SSID operation
mode and encryption.
<General Setup>
ESSID: Edit the SSID. The default SSID for radio0 is IWF 300/
IWF 310_11N and default SSID for radio1 is IWF 300/IWF
310_11A_5G
Mode: Select the operation mode:
• AP
• Client Router
• 802.11s ( Mesh mode)
56
IWF 300 and IWF 310 User Manual