Chapter 2: System Configuration
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
<General Setup>
Wireless network is enabled: Enable or disable the radio
interface.
Operating frequency: Select radio frequency and channel
bandwidth for signal transmission.
For channel bandwidth, please note you need to confirm AP/
client mode or mesh mode and the channel you will use.
Transmit Power: Select the transmit power of a radio.
<Advanced Settings>
Distance Optimization: Specify the ACK timeout by entering
the value manually. ACK timeout can be entered by defining
the link distance. A value too short for the ACK timeout may
cause transmission time out and no packets can be received. A
value too long may cause low throughput rate.
Fragmentation Threshold: Default=off. Specify the
Fragmentation threshold by entering the value manually
[300-2346 bytes]. This is the maximum size for a packet
before data is fragmented into multiple packets. Setting the
Fragmentation threshold too low may result in poor network
performance. Only minor modifications of this value are
recommended.
55
IWF 300 and IWF 310 User Manual