Chapter 2: System Configuration
2.4.1.4 DHCP Server
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
Bridge interfaces
You can bridge an interface group for your WAN or LAN
interface. Normally, only LAN interface needs to enable
bridge interfaces. After enabling bridge interfaces, select the
interfaces to bridge.
Interface
Select the interfaces for your bridge group. Select both the
Ethernet adapter (most likely eth0.1 or eth1) and the wireless
network.
<General Setup>
Ignore Interface: Select this option to disable your DHCP
server, you will need a static IP or another DHCP server for
your network interfaces. Default is "enable DHCP".
51
IWF 300 and IWF 310 User Manual