Chapter 2: System Configuration
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
Then GUI will display the file checksum.
You can choose "Proceed" to start the upgrade process.
Note:
After you click "Proceed", the DUT firmware will
be upgraded with the file you selected, and the upgrade
progress will be displayed like below:
Note:
The whole programming might take several minutes
to complete the flash writing.
POWER OFF THE DEVICE
If the firmware upgrad is successful, the GUI should switch to
the Login page.
You can also check the version via the "Firmware Version"
field under the Status page.
42
PLEASE DO NOT REBOOT OR
before the whole progress.
IWF 300 and IWF 310 User Manual