Important Note - Low Range Off-Road SST-SB-DP Installation Instructions Manual

IMPORTANT NOTE:

(Original Equipment Manufacturer) steering stabilizer which requires the use of all
four washer spacers (See Step 2 blow). If you are installing the stabilizer bracket with
an aftermarket stabilizer you my NOT need all 4 spacer washers.
Step 1
Place two of the supplied washers on
the top of the stabilizer, place the
stabilizer bracket over the assembly and
install the supplied M12 bolt engaging
the two washer spacers as shown.
Step 3
Install the supplied M12 nylock nut.
Leave it loose for now.
These instructions were created using a Samurai with an OEM
Step 2
Place two more supplied washer
spacers on the bottom of the stabilizer
and continue installing the M12 bolt.
Note: Add or subtract washers to
eliminate any space between the
stabilizer and bracket.
Step 4
Position the stabilizer bracket on top of
the drop pitman arm, align the holes and
install both of the supplied M8 bolts.