Advertisement
Caution
This vehicle will require a professional wheel alignment after the leveling/lift kit has
been installed. Failure to have this vehicle professionally aligned could result in poor
vehicle stability, handling, and braking; as well as excessive tire tread wear. Further,
certain aspects of this installation can be dangerous. Therefore, we recommend that a
General Note
These instructions are written for use with a floor jack and jack
stands. However, they can be easily adapted to the use of a
twin post lift.
Step 1
Lift the front of the vehicle with a floor
jack and support it with (2) jack stands.
Place the jack stands under the frame
just behind the front wheels. Safety
stands should always be positioned on a
sturdy part of the frame that is
horizontal.
Caution:
You should never work on a vehicle
that is supported by any kind of a
jack without the added protection of
jack stands. The vehicle can easily
slip from the jack and cause serious
bodily injury and or vehicle damage.
Always use jack stands.
Advertisement
